Motul MOTYLGEAR 75W-90
Gearbox and differential lubricant Technosynthese

TYPE OF USE
Specially recommended for gearboxes hard to shift and/or noisy gearboxes. All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer gearbox and hypoïd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES STANDARDS
API GL4 and GL5 / MIL-L-2105D
Extreme pressure lubricant for an efficient anti wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update.

Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears.

Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.

RECOMMENDATIONS
Oil change: According to manufacturers requirements and adjust according to your own use.

PROPERTIES
Viscosity grade SAE J306 75W-90
Density at 15°C (59°F) ASTM D1298 0.868
Viscosity at 40°C (104°F) ASTM D445 107.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 16.7 mm²/s
Viscosity index VIE ASTM D2270 171
Flash point ASTM D92 200°C / 392°F
Pour point ASTM D97 -45°C / -49°F